reprap:wanhao:duplicator6:purchaseable_upgrade_parts

Purchasable Upgrade Parts

Replacement Fans

Nicer Table with Clickable Store Links

Click here to view or edit in Google Docs

Stock PartUpgrade Part
Nozzle.4mm MK10/MK11Micro Swiss All Metal Kit - $65 USDTriangle Labs Version (Less Parts) - $15 USD
Heater40 watt 6mm cartridge24V 50W heater
Heater Block Insulation/"Sock"n/aHigh Temp Silicone Nozzle Tips
Temp ProbePT100 ThermocouplePT100 Temperature sensor 3mm*30mm Platinum Resistance RTD Stainless Steel Probe 1m High Temperature 2 Wire -40~400 C Degree
Power Supply350W 24V Mean Well LRS-350-24?
Heat BlockMK11 Hot End Aluminum BlockMicro Swiss All Metal Kit
Build Plate Surface3M Heating Board PlateBorax Glass Plate + Silicone Thermal Adhesive+ Silicone Thermal Adhesive
Extruder FansAAA 40mm x 40mm x 10mm 24v Brushless Sleeve Bearing Fan (HZHZ 4010MS, DC24V, 0.12Amax) w/ 185mm power cable24V DC Brushless Blower Cooling Fan 50x50x15mm
Motherboard FanAAA 40mm x 40mm x 10mm 24v Brushless Sleeve Bearing Fan (HZHD 4010MS, DC24V, 0.12Amax) w/ 250mm power cable24V DC Brushless Blower Cooling Fan 50x50x15mm
Guide TubeMK10/11 Guide Tube for PTFEPTFE Teflon Tube OD 4mm ID 2mm
MotherboardD6 Motherboard (ATMEGA 2560 based)?
Control BoardLCD and SD card control board?
End StopsCGC 5A 125-250V 10T85 Normally Closed Switch
Extruder BoardInterface Panel/Keyset/Patching BoardFlat Ribbon Cable 16 Cond2x8 Pin Female Header IDC Cable Connector
X/Y Axis MotorNEMA 17 StepperHybrid Steppers
Z Axis MotorNEMA 17 StepperHybrid Steppers
Extruder MotorNEMA 17 Stepper
Extruder Gear5mm 40T Extruder Driver Feeder Gear Bore
Motor Dampersn/aNEMA 17 Steel & Rubber Stepper Motor Vibration DamperNeed to print adapters, many to choose from on thingiverse
LED Lighting24v LED strip DC 24V 12W SMD3528 150LEDs IP68 Waterproof
BearingsIgnus Drylin
Z-ProbeNone on the D6See page about Z-probe upgrading

Rods/Shafts

Check if your 6mm and 8mm linear rods are straight

Bearings

Smooth operation requires straight and true (no bends or kinks) shafts and properly lubricated bearings.

(4) x LM6LUU Linear Bearings - for the extruder gantry (35mm long)

(8) x KFL08 Flanged Pillow Block Bearings

(4) x LMK12UU Flanged Linear Bearings - for the Z axis

  • reprap/wanhao/duplicator6/purchaseable_upgrade_parts.txt
  • Last modified: 2019/01/09 08:56
  • by champatron