reprap:wanhao:duplicator6:major_components:extruder

This is an old revision of the document!


The printer uses what Wanhao calls a “MK11 extruder”. There's no real standard, but it is an improvement over Wanhaos previous extruders back to MK8.

It uses an MK10 nozzle and thermal barrier, but new heater block. The new heater block has deeper cartridge slots for larger heater cartridges and thermocouple. It still uses the same plastic feed system as the MK9.

https://groups.google.com/forum/#!topic/wanhao-printer-3d/TEdslEknny4

  • reprap/wanhao/duplicator6/major_components/extruder.1539808638.txt.gz
  • Last modified: 2018/12/02 02:27
  • (external edit)