Show pageOld revisionsBacklinksCite current pageBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. The printer uses what Wanhao calls a "MK11 extruder". There's [[https://groups.google.com/forum/#!topic/wanhao-printer-3d/TEdslEknny4|no real standard]], but it is an improvement over Wanhaos previous extruders back to MK8. The stock MK11 uses a 0.4mm MK10 nozzle and PTFE thermal barrier, but new aluminum heater block. The new heater block has deeper slots for the larger 24v heater cartridges and thermocouple. It still uses the same plastic feed system as the MK9. https://groups.google.com/forum/#!topic/wanhao-printer-3d/TEdslEknny4 reprap/wanhao/duplicator6/major_components/extruder.txt Last modified: 2018/12/02 02:27by 127.0.0.1