reprap:anet:a8:layer-heights

This is an old revision of the document!


Valid Layer Heights

Based on the pitch 2.0 mm of the default Anet A8 Z-Axis leadscrew 300mm T8, the Z-Motor 200 steps per revolution , and this calculator, we can calculate the list of valid layer heights: 0.1, 0.11, 0.12 …, 0.2,…, 0.3 . In phew words you can proceed by 0.01 steps.

Instead if you adopted threaded rods M8, the pitch is 1.25mm and valid layer heights are: 0.0125, …, 0.025,…, 0.05, …,0.1, … ,0.2, … each sum or multiple of this values are exact steps counts.

PLS DO NOT RESTORE WRONG VALUES

  • reprap/anet/a8/layer-heights.1484900416.txt.gz
  • Last modified: 2018/12/02 02:27
  • (external edit)