Show pageOld revisionsBacklinksCite current pageBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Optimal Layer Heights ====== Based on the lead of the Anet A8 Z-Axis leadscrews (8mm - each full rotation moves the Z-Axis 8mm), the Z-Motor steps per revolution (200), and [[http://prusaprinters.org/calculator/#optimallayer|this calculator]], we can calculate the list of optimal layer heights: **0.08, 0.12, 0.16, 0.20, 0.24, 0.28, 0.32** etc. - in increments of 0.04mm. The leadscrews are T8 - with lead 8mm, pitch 2mm and 4 screw threads. Note to editors: [[https://www.facebook.com/groups/OFFICIALAnet3DprinterSupportGroup/permalink/620740658114499/|discuss here]] before changing. reprap/anet/a8/layer-heights.txt Last modified: 2018/12/02 02:27by 127.0.0.1