This is an old revision of the document!
Valid Layer Heights
Based on the pitch 2.0 mm of the default Anet A8 Z-Axis leadscrew 300mm T8, the Z-Motor 200 steps per revolution , and this calculator, we can calculate the list of valid layer heights:0.1, 0.11, 0.12 …, 0.2,…, 0.3.<br> In phew words you can proceed by 0.01 steps.<br><br>
Instead if you adopted threaded rods M8, the pitch is 1.25mm and valid layer heights are: 0.0125, …, 0.025,…, 0.05, …,0.1, … ,0.2, … each sum or multiple of this values are exact steps counts.<br><br>
PLS DO NOT RESTORE WRONG VALUES