This is an old revision of the document!
Specifications
Official Specifications
Wanhao's Product Page (May contain errors and oversimplifications, should not be thought of as authoritative, here for reference only)
Printing Technology: Fused Filament Fabrication (FFF)/(FDM) Build Volume: 200mm x 200mm x ~180mm (tall) Layer Resolution: from Low of 200microns to Ultra 20 microns Positional Precision: X 12.5 microns, Y 12.5 microns, Z 5 microns Printing Material: PLA, ABS, PVA, PEVA, HIPS Filament Diameter: 1.75mm Nozzle Diameter: 0.4mm Print Speed: 30mm - 150mm/s Travel Speed: 30mm - 150mm/s Extruder Temperature Range: 180degC - 260degC Heated Build Plate Temp Range: 50degC - 100degC
Physical Dimensions:
Frame Dimensions: X 345mm x Y 364mm x Z 480mm Shipping Box: X 420mm x Y 420mm x Z 550mm Net Weight: 13.9kg Gross Weight: 16.8kg
Operating Conditions:
Ambient Operating Temperature: 15degC - 32degC Storage Temperature: 0degC - 32degC Average Noise Level: 49dB
Electrical Specifications:
AC Outlet Input: 100-240V, 50-60Hz Power Consumption: ~4 Amps, 221 Watt Max
Wanhao's Duplicator 6 User Manual rev A
Wanhao's Duplicator 6 eBrochure