Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
reprap:wanhao:duplicator6:specifications [2018/05/16 18:07] – champatron | reprap:wanhao:duplicator6:specifications [2018/12/02 02:27] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 6: | Line 6: | ||
(May contain errors and oversimplifications, | (May contain errors and oversimplifications, | ||
- | * Printing Technology: Fused Filament Fabrication (FFF)/ | + | |
- | * Build Volume: 200mm x 200mm x ~180mm (tall) | + | * Build Volume: 200mm x 200mm x ~180mm (tall) |
- | * Layer Resolution: from Low of 200microns to Ultra 20 microns | + | * Layer Resolution: from Low of 200microns to Ultra 20 microns |
- | * Positional Precision: X 12.5 microns, Y 12.5 microns, Z 5 microns | + | * Positional Precision: X 12.5 microns, Y 12.5 microns, Z 5 microns |
- | * Printing Material: PLA, ABS, PVA, PEVA, HIPS | + | * Printing Material: PLA, ABS, PVA, PEVA, HIPS |
- | * Filament Diameter: 1.75mm | + | * Filament Diameter: 1.75mm |
- | * Nozzle Diameter: 0.4mm | + | * Nozzle Diameter: 0.4mm |
- | * Print Speed: 30mm - 150mm/s | + | * Print Speed: 30mm - 150mm/s |
- | * Travel Speed: 30mm - 150mm/s | + | * Travel Speed: 30mm - 150mm/s |
- | * Extruder Temperature Range: 180degC - 260degC | + | * Extruder Temperature Range: 180degC - 260degC |
- | * Heated Build Plate Temp Range: 50degC - 100degC | + | * Heated Build Plate Temp Range: 50degC - 100degC |
Physical Dimensions: | Physical Dimensions: | ||
- | Frame Dimensions: X 345mm x Y 364mm x Z 480mm | + | * Frame Dimensions: X 345mm x Y 364mm x Z 480mm |
- | Shipping Box: X 420mm x Y 420mm x Z 550mm | + | |
- | Net Weight: 13.9kg | + | |
- | Gross Weight: 16.8kg | + | |
Operating Conditions: | Operating Conditions: | ||
- | Ambient Operating Temperature: | + | * Ambient Operating Temperature: |
- | Storage Temperature: | + | |
- | Average Noise Level: 49dB | + | |
Electrical Specifications: | Electrical Specifications: | ||
- | AC Outlet Input: 100-240V, 50-60Hz | + | * AC Outlet Input: 100-240V, 50-60Hz |
- | Power Consumption: | + | |
+ | |||
+ | [[http:// | ||
+ | |||
+ | [[https:// | ||
+ | |||
+ | ==== Real World Specifications ==== | ||
+ | |||
+ | [Copied from Wanhao Specs page, changes/ | ||
+ | * Printing Technology: Fused Filament Fabrication (FFF)/ | ||
+ | * Build Volume: 200mm x 200mm x ~180mm (tall) | ||
+ | * Layer Resolution: from Low of 200microns to Ultra 20 microns | ||
+ | * Positional Precision: X 12.5 microns, Y 12.5 microns, Z 5 microns | ||
+ | * Printing Material: PLA, ABS, PVA, PEVA, HIPS **(Additional materials possible after hot end upgrades)** | ||
+ | * Filament Diameter: 1.75mm | ||
+ | * Nozzle Diameter: 0.4mm **(possible to change to 0.2mm - 0.6mm with replacement parts)** | ||
+ | * Print Speed: 30mm - 150mm/s | ||
+ | * Travel Speed: 30mm - 150mm/s | ||
+ | * Extruder Temperature Range: 180degC - **200degC (Above 200degC, the PTFE tube in the heat block will begin breaking down, causing clogs and releasing toxic? gases)** | ||
+ | * Heated Build Plate Temp Range: 50degC - **120degC** | ||
+ | |||
+ | Physical Dimensions: | ||
+ | |||
+ | * Frame Dimensions: X 345mm x Y 364mm x Z 480mm | ||
+ | * Shipping Box: X 420mm x Y 420mm x Z 550mm | ||
+ | * Net Weight: 13.9kg | ||
+ | * Gross Weight: 16.8kg | ||
+ | |||
+ | Operating Conditions: | ||
+ | |||
+ | * Ambient Operating Temperature: | ||
+ | * Storage Temperature: | ||
+ | * Average Noise Level: 49dB **(Much quieter after installing motor dampers)** | ||
+ | |||
+ | Electrical Specifications: | ||
+ | |||
+ | * AC Outlet Input: 100-240V, 50-60Hz | ||
+ | * Power Consumption: | ||
- | Wanhao' | ||
- | Wanhao' |