reprap:wanhao:duplicator6:specifications

Specifications

Wanhao's Product Page (May contain errors and oversimplifications, should not be thought of as authoritative, here for reference only)

  • Printing Technology: Fused Filament Fabrication (FFF)/(FDM)
  • Build Volume: 200mm x 200mm x ~180mm (tall)
  • Layer Resolution: from Low of 200microns to Ultra 20 microns
  • Positional Precision: X 12.5 microns, Y 12.5 microns, Z 5 microns
  • Printing Material: PLA, ABS, PVA, PEVA, HIPS
  • Filament Diameter: 1.75mm
  • Nozzle Diameter: 0.4mm
  • Print Speed: 30mm - 150mm/s
  • Travel Speed: 30mm - 150mm/s
  • Extruder Temperature Range: 180degC - 260degC
  • Heated Build Plate Temp Range: 50degC - 100degC

Physical Dimensions:

  • Frame Dimensions: X 345mm x Y 364mm x Z 480mm
  • Shipping Box: X 420mm x Y 420mm x Z 550mm
  • Net Weight: 13.9kg
  • Gross Weight: 16.8kg

Operating Conditions:

  • Ambient Operating Temperature: 15degC - 32degC
  • Storage Temperature: 0degC - 32degC
  • Average Noise Level: 49dB

Electrical Specifications:

  • AC Outlet Input: 100-240V, 50-60Hz
  • Power Consumption: ~4 Amps, 221 Watt Max

Wanhao's Duplicator 6 User Manual rev A

Wanhao's Duplicator 6 eBrochure

[Copied from Wanhao Specs page, changes/corrections in BOLD]

  • Printing Technology: Fused Filament Fabrication (FFF)/(FDM)
  • Build Volume: 200mm x 200mm x ~180mm (tall)
  • Layer Resolution: from Low of 200microns to Ultra 20 microns
  • Positional Precision: X 12.5 microns, Y 12.5 microns, Z 5 microns
  • Printing Material: PLA, ABS, PVA, PEVA, HIPS (Additional materials possible after hot end upgrades)
  • Filament Diameter: 1.75mm
  • Nozzle Diameter: 0.4mm (possible to change to 0.2mm - 0.6mm with replacement parts)
  • Print Speed: 30mm - 150mm/s
  • Travel Speed: 30mm - 150mm/s
  • Extruder Temperature Range: 180degC - 200degC (Above 200degC, the PTFE tube in the heat block will begin breaking down, causing clogs and releasing toxic? gases)
  • Heated Build Plate Temp Range: 50degC - 120degC

Physical Dimensions:

  • Frame Dimensions: X 345mm x Y 364mm x Z 480mm
  • Shipping Box: X 420mm x Y 420mm x Z 550mm
  • Net Weight: 13.9kg
  • Gross Weight: 16.8kg

Operating Conditions:

  • Ambient Operating Temperature: 15degC - 32degC
  • Storage Temperature: 0degC - 32degC
  • Average Noise Level: 49dB (Much quieter after installing motor dampers)

Electrical Specifications:

  • AC Outlet Input: 100-240V, 50-60Hz
  • Power Consumption: ~4 Amps, ~300 Watt Max (when both heaters are active)
  • reprap/wanhao/duplicator6/specifications.txt
  • Last modified: 2018/12/02 02:27
  • by 127.0.0.1