reprap:wanhao:duplicator6:specifications

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
reprap:wanhao:duplicator6:specifications [2018/05/16 18:11] champatronreprap:wanhao:duplicator6:specifications [2018/05/16 18:12] champatron
Line 42: Line 42:
 ==== Real World Specifications ==== ==== Real World Specifications ====
  
-[Copied from Wanhao Specs page, original in orange, changes/corrections in red]+[Copied from Wanhao Specs page, changes/corrections in **BOLD**]
   * Printing Technology: Fused Filament Fabrication (FFF)/(FDM)   * Printing Technology: Fused Filament Fabrication (FFF)/(FDM)
   * Build Volume: 200mm x 200mm x ~180mm (tall)   * Build Volume: 200mm x 200mm x ~180mm (tall)
   * Layer Resolution: from Low of 200microns to Ultra 20 microns   * Layer Resolution: from Low of 200microns to Ultra 20 microns
   * Positional Precision: X 12.5 microns, Y 12.5 microns, Z 5 microns   * Positional Precision: X 12.5 microns, Y 12.5 microns, Z 5 microns
-  * Printing Material: PLA, ABS, PVA, PEVA, HIPS (Additional materials possible after hot end upgrades)+  * Printing Material: PLA, ABS, PVA, PEVA, HIPS **(Additional materials possible after hot end upgrades)**
   * Filament Diameter: 1.75mm   * Filament Diameter: 1.75mm
-  * Nozzle Diameter: 0.4mm (possible to change to 0.2mm - 0.6mm with replacement parts)+  * Nozzle Diameter: 0.4mm **(possible to change to 0.2mm - 0.6mm with replacement parts)**
   * Print Speed: 30mm - 150mm/s   * Print Speed: 30mm - 150mm/s
   * Travel Speed: 30mm - 150mm/s   * Travel Speed: 30mm - 150mm/s
-  * Extruder Temperature Range: 180degC - 200degC (Above 200degC, the PTFE tube in the heat block will begin breaking down, causing clogs and releasing toxic? gases) +  * Extruder Temperature Range: 180degC - **200degC (Above 200degC, the PTFE tube in the heat block will begin breaking down, causing clogs and releasing toxic? gases)** 
-                                                HIGHLY RECOMMEND ALL METAL HOT END UPGRADE!+**                                                __HIGHLY RECOMMEND ALL METAL HOT END UPGRADE!**__
    
-  * Heated Build Plate Temp Range: 50degC - 120degC+  * Heated Build Plate Temp Range: 50degC** - 120degC**
  
 Physical Dimensions: Physical Dimensions:
  • reprap/wanhao/duplicator6/specifications.txt
  • Last modified: 2018/12/02 02:27
  • by 127.0.0.1