Differences

This shows you the differences between two versions of the page.

--- reprap:wanhao:duplicator6:how-to_guides:properly_tighten_nozzle_heat_block_heat_tube_assembly [2018/05/23 06:59] – champatron
+++ reprap:wanhao:duplicator6:how-to_guides:properly_tighten_nozzle_heat_block_heat_tube_assembly [2018/12/02 02:27] (current) – external edit 127.0.0.1
@@ Line 13: / Line 13: @@
-  - Assembly the heat tube (silver tube part that sticks up into the extruder body) into the heat block (aluminum or brass middle part with the heater and thermister installed) and the nozzle into the heat block fairly tightly with just your fingers.
+  - Assemble the heat tube (silver tube part that sticks up into the extruder body) into the heat block (aluminum or brass middle part with the heater and thermister installed) and the nozzle into the heat block fairly tightly with just your fingers.
   - Stick the whole assembly up into the extruder body and tighten the tiny set screw above it to hold it in place.
   - Use the printer to heat the nozzle to your highest printing temperature