Bibliographic details for "Printer Calibration"

• Page name: Printer Calibration
• Author: Anonymous Contributors
• Publisher: 3DPrint.Wiki.
• Date of this revision: 2 December 2018 02:27 CET
• Date retrieved: 14 June 2025 06:53 CEST
• Permanent link: https://3dprint.wiki/reprap/firmware/calibration?rev=1543714074
• Page Version ID: 1543714074

Please remember to check with your standards guide or professor’s guidelines for the exact syntax to suit your needs.

Anonymous Contributors (2018). Printer Calibration. 3DPrint.Wiki. Retrieved 06:53, 14 June, 2025 from https://3dprint.wiki/reprap/firmware/calibration?rev=1543714074.

“Printer Calibration.” 3DPrint.Wiki. 2 Dec 2018, 02:27 CET. 14 Jun 2025, 06:53 <https://3dprint.wiki/reprap/firmware/calibration?rev=1543714074>.

Anonymous Contributors, ‘Printer Calibration’, 3DPrint.Wiki, 2 December 2018, 02:27 CET, <https://3dprint.wiki/reprap/firmware/calibration?rev=1543714074> [accessed 14 June 2025]

Anonymous Contributors, “Printer Calibration,” 3DPrint.Wiki, https://3dprint.wiki/reprap/firmware/calibration?rev=1543714074 (accessed June 14, 2025).

Anonymous Contributors. Printer Calibration [Internet]. 3DPrint.Wiki; 2018 Dec 2, 02:27 CET [cited 2025 Jun 14]. Available from: https://3dprint.wiki/reprap/firmware/calibration?rev=1543714074.

Printer Calibration, https://3dprint.wiki/reprap/firmware/calibration?rev=1543714074 (last visited June 14, 2025).

Anonymous Contributors. Printer Calibration. 3DPrint.Wiki. December 2, 2018, 02:27 CET. Available at: https://3dprint.wiki/reprap/firmware/calibration?rev=1543714074. Accessed June 14, 2025.

 @misc{ wiki:xxx,
   author = "Anonymous Contributors",
   title = "Printer Calibration --- 3DPrint.Wiki",
   year = "2018",
   url = "https://3dprint.wiki/reprap/firmware/calibration?rev=1543714074",
   note = "[Online; accessed 14-June-2025]"
 }

When using the LaTeX package url (\usepackage{url} somewhere in the preamble), which tends to give much more nicely formatted web addresses, the following may be preferred:

 @misc{ wiki:xxx,
   author = "Anonymous Contributors",
   title = "Printer Calibration --- 3DPrint.Wiki",
   year = "2018",
   url = "\url{https://3dprint.wiki/reprap/firmware/calibration?rev=1543714074}",
   note = "[Online; accessed 14-June-2025]"
 }