reprap:anet:a8:replace_connectors

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
reprap:anet:a8:replace_connectors [2016/11/11 08:34] vidschofelixreprap:anet:a8:replace_connectors [2018/12/02 02:27] (current) – external edit 127.0.0.1
Line 12: Line 12:
  
 You need: You need:
-  * new connectors with a pin distance of 5,08mm and a currency rating of at least 20A (ebay: AKZ120) +  * new connectors with a pin distance of 5,08mm and a currency rating of at least 20A ([[https://www.ebay.de/itm/10-50PCS-5-08mm-Pitch-Panel-KF301-2P-KF301-3P-Screw-Terminal-Block-PCB-Connector/232498440599|ebay]]: AKZ120 or 5mm PCB
-  * soldering and desldering equipment+  * soldering and desldering equipment (like [[https://www.ebay.de/itm/Lotkolben-Set-Elektronik-Lotstation-220V-60W-Soldering-Regelbar/162791502112|this]])
  
 ===== Processing ===== ===== Processing =====
Line 42: Line 42:
 ===== Related improvement ===== ===== Related improvement =====
  
-To prevent the high currency of the heatbed going through the Mainboard [[reprap:anet:a8:heatbed_relay|apply a relay]] to your setup.+To prevent the high currency of the heatbed going through the Mainboard [[reprap:electronics:heatbed_mosfet|apply a relay]] to your setup.
  • reprap/anet/a8/replace_connectors.1478849674.txt.gz
  • Last modified: 2018/12/02 02:27
  • (external edit)