Differences

This shows you the differences between two versions of the page.

--- reprap:anet:a8:nozzle [2019/01/03 07:55] – [Leaking filament] cj_elec_tech
+++ reprap:anet:a8:nozzle [2019/01/03 08:00] – [Howto Change Nozzle] cj_elec_tech
@@ Line 1: / Line 1: @@
-====== Howto Change Nozzle ======
+====== How to Change a Nozzle ======
-There are several reasons why you need to change or replace the nozzle, e.g. a clogged nozzle or to change the diameter.
+There are several reasons why you might need to change or replace a nozzle, e.g. a clogged nozzle or to change the nozzle diameter.
-Unscrew the old nozzle. If it is stuck in the heatblock, heat it up. This way you can easily unscrew the nozzle.
-Screw the new nozzle into the heatblock and make sure it touches the throat to prevent it from leaking.
+Unscrew the old nozzle. If it's stuck in the heaterblock, heat it up. This should make it easy to unscrew the nozzle.
-If you changed the nozzle Diameter, you need to change your slicer settings.
+Screw the new nozzle into the heaterblock and make sure it touches the throat to prevent it from leaking.
+If you changed the nozzle Diameter, remember to change your slicer settings.
 MK8 nozzles are compatible with the A8.