Differences

This shows you the differences between two versions of the page.

--- reprap:anet:a8:layer-heights [2017/01/20 09:18] – nerolauda
+++ reprap:anet:a8:layer-heights [2017/01/20 09:19] – nerolauda
@@ Line 1: / Line 1: @@
 ====== Valid Layer Heights ======
-Based on the pitch 2.0 mm of the default Anet A8 Z-Axis **leadscrew** 300mm T8, the Z-Motor 200 steps per revolution , and [[http://prusaprinters.org/calculator/#optimallayer|this calculator]], we can calculate the list of valid layer heights:0.1, 0.11, 0.12 ..., 0.2,..., 0.3.<br>
+Based on the pitch 2.0 mm of the default Anet A8 Z-Axis **leadscrew** 300mm T8, the Z-Motor 200 steps per revolution , and [[http://prusaprinters.org/calculator/#optimallayer|this calculator]], we can calculate the list of valid layer heights:0.1, 0.11, 0.12 ..., 0.2,..., 0.3.
-In phew words you can proceed by 0.01 steps.<br><br>
+In phew words you can proceed by 0.01 steps.
-Instead if you adopted threaded rods M8, the pitch is 1.25mm and valid layer heights are: ** 0.0125, ..., 0.025,..., 0.05, ...,0.1, ... ,0.2, ...** each sum or multiple of this values are exact steps counts.<br><br>
+Instead if you adopted threaded rods M8, the pitch is 1.25mm and valid layer heights are: ** 0.0125, ..., 0.025,..., 0.05, ...,0.1, ... ,0.2, ...** each sum or multiple of this values are exact steps counts.
 PLS DO NOT RESTORE WRONG VALUES