firmware:klipper:bltouch-with-raspberry-pi

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
firmware:klipper:bltouch-with-raspberry-pi [2022/03/15 02:44] – [Why?] vidschofelixfirmware:klipper:bltouch-with-raspberry-pi [2022/03/16 20:00] – [printer.cfg adjustment] vidschofelix
Line 28: Line 28:
  
 [bltouch] [bltouch]
-sensor_pin: ^rpi:gpio12+sensor_pin: ^rpi:gpio0
 #   Pin connected to the BLTouch sensor pin. Most BLTouch devices #   Pin connected to the BLTouch sensor pin. Most BLTouch devices
 #   require a pullup on the sensor pin (prefix the pin name with "^"). #   require a pullup on the sensor pin (prefix the pin name with "^").
  • firmware/klipper/bltouch-with-raspberry-pi.txt
  • Last modified: 2022/03/16 20:06
  • by vidschofelix