Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
reprap:wanhao:duplicator6:specifications [2018/05/16 18:11] – champatron | reprap:wanhao:duplicator6:specifications [2018/12/02 02:27] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 42: | Line 42: | ||
==== Real World Specifications ==== | ==== Real World Specifications ==== | ||
- | [Copied from Wanhao Specs page, original in orange, changes/ | + | [Copied from Wanhao Specs page, changes/ |
* Printing Technology: Fused Filament Fabrication (FFF)/(FDM) | * Printing Technology: Fused Filament Fabrication (FFF)/(FDM) | ||
* Build Volume: 200mm x 200mm x ~180mm (tall) | * Build Volume: 200mm x 200mm x ~180mm (tall) | ||
* Layer Resolution: from Low of 200microns to Ultra 20 microns | * Layer Resolution: from Low of 200microns to Ultra 20 microns | ||
* Positional Precision: X 12.5 microns, Y 12.5 microns, Z 5 microns | * Positional Precision: X 12.5 microns, Y 12.5 microns, Z 5 microns | ||
- | * Printing Material: PLA, ABS, PVA, PEVA, HIPS (Additional materials possible after hot end upgrades) | + | * Printing Material: PLA, ABS, PVA, PEVA, HIPS **(Additional materials possible after hot end upgrades)** |
* Filament Diameter: 1.75mm | * Filament Diameter: 1.75mm | ||
- | * Nozzle Diameter: 0.4mm (possible to change to 0.2mm - 0.6mm with replacement parts) | + | * Nozzle Diameter: 0.4mm **(possible to change to 0.2mm - 0.6mm with replacement parts)** |
* Print Speed: 30mm - 150mm/s | * Print Speed: 30mm - 150mm/s | ||
* Travel Speed: 30mm - 150mm/s | * Travel Speed: 30mm - 150mm/s | ||
- | * Extruder Temperature Range: 180degC - 200degC (Above 200degC, the PTFE tube in the heat block will begin breaking down, causing clogs and releasing toxic? gases) | + | * Extruder Temperature Range: 180degC - **200degC (Above 200degC, the PTFE tube in the heat block will begin breaking down, causing clogs and releasing toxic? gases)** |
- | HIGHLY RECOMMEND ALL METAL HOT END UPGRADE! | + | * Heated Build Plate Temp Range: 50degC - **120degC** |
- | + | ||
- | * Heated Build Plate Temp Range: 50degC - 120degC | + | |
Physical Dimensions: | Physical Dimensions: | ||
Line 68: | Line 66: | ||
* Ambient Operating Temperature: | * Ambient Operating Temperature: | ||
* Storage Temperature: | * Storage Temperature: | ||
- | * Average Noise Level: 49dB (Much quieter after installing motor dampers) | + | * Average Noise Level: 49dB **(Much quieter after installing motor dampers)** |
Electrical Specifications: | Electrical Specifications: | ||
* AC Outlet Input: 100-240V, 50-60Hz | * AC Outlet Input: 100-240V, 50-60Hz | ||
- | * Power Consumption: | + | * Power Consumption: |