Differences

This shows you the differences between two versions of the page.

--- reprap:wanhao:duplicator6:specifications [2018/05/16 18:09] – champatron
+++ reprap:wanhao:duplicator6:specifications [2018/12/02 02:27] (current) – external edit 127.0.0.1
@@ Line 36: / Line 36: @@
   * Power Consumption: ~4 Amps, 221 Watt Max
-Wanhao's Duplicator 6 User Manual rev A
+[[http://www.wanhao3dprinter.com/xiazai/d6_user_manual_rev_a.pdf|Wanhao's Duplicator 6 User Manual rev A]]
+[[https://cdn.shopify.com/s/files/1/0299/7809/files/Wanhao_D6_eBrochure.pdf|Wanhao's Duplicator 6 eBrochure]]
+==== Real World Specifications ====
+[Copied from Wanhao Specs page, changes/corrections in **BOLD**]
+  * Printing Technology: Fused Filament Fabrication (FFF)/(FDM)
+  * Build Volume: 200mm x 200mm x ~180mm (tall)
+  * Layer Resolution: from Low of 200microns to Ultra 20 microns
+  * Positional Precision: X 12.5 microns, Y 12.5 microns, Z 5 microns
+  * Printing Material: PLA, ABS, PVA, PEVA, HIPS **(Additional materials possible after hot end upgrades)**
+  * Filament Diameter: 1.75mm
+  * Nozzle Diameter: 0.4mm **(possible to change to 0.2mm - 0.6mm with replacement parts)**
+  * Print Speed: 30mm - 150mm/s
+  * Travel Speed: 30mm - 150mm/s
+  * Extruder Temperature Range: 180degC - **200degC (Above 200degC, the PTFE tube in the heat block will begin breaking down, causing clogs and releasing toxic? gases)**
+  * Heated Build Plate Temp Range: 50degC - **120degC**
+Physical Dimensions:
+  * Frame Dimensions: X 345mm x Y 364mm x Z 480mm
+  * Shipping Box: X 420mm x Y 420mm x Z 550mm
+  * Net Weight: 13.9kg
+  * Gross Weight: 16.8kg
+Operating Conditions:
+  * Ambient Operating Temperature: 15degC - 32degC
+  * Storage Temperature: 0degC - 32degC
+  * Average Noise Level: 49dB **(Much quieter after installing motor dampers)**
+Electrical Specifications:
+  * AC Outlet Input: 100-240V, 50-60Hz
+  * Power Consumption: ~4 Amps, **~300 Watt Max (when both heaters are active)**
-Wanhao's Duplicator 6 eBrochure