Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
reprap:wanhao:duplicator6:major_components:stepper_motors [2018/09/23 14:28] – champatron | reprap:wanhao:duplicator6:major_components:stepper_motors [2019/01/06 21:05] (current) – [Extruder Stepper Motor] champatron | ||
---|---|---|---|
Line 2: | Line 2: | ||
- | === Extruder Stepper Motor === | + | ===== Extruder Stepper Motor ===== |
The stepper motors are all (externally) unmarked. As such, gathering information for them is quite dificult. | The stepper motors are all (externally) unmarked. As such, gathering information for them is quite dificult. | ||
- | It is known that they are type NEMA17, 2-phase hybrid bipolar, however | + | It is known that they are type NEMA 17, 2-phase hybrid bipolar. They are fairly easy to replace, however, |
+ | ---- | ||
+ | |||
+ | ==== X and Y Axis Motors ==== | ||
+ | |||
+ | NEMA17 - 40mm | ||
- | === X/Y axis === | ||
- | NEMA17-40mm | ||
170mm x 170mm x 400mm depth | 170mm x 170mm x 400mm depth | ||
- | === Z axis === | + | ---- |
- | NEMA17-34 | + | |
+ | ==== Z axis ==== | ||
+ | |||
+ | NEMA17 - 34mm | ||
170mm x 170mm x 340mm depth | 170mm x 170mm x 340mm depth | ||
+ | Step Angle 1.8。 | ||
+ | |||
+ | Step Angle Accuracy ±5% (full step, no load) | ||
+ | |||
+ | Resistance Accuracy ±10% | ||
+ | |||
+ | Inductance Accuracy ±20% | ||
+ | |||
+ | Temperature Rise 80。C Max.(rated current,2 phase on) | ||
+ | |||
+ | Ambient Temperature -20。C~+50。C | ||
+ | |||
+ | Insulation Resistance 100MΩMin. ,500VDC | ||
+ | |||
+ | Dielectric Strength 500VAC for one minute | ||
+ | |||
+ | Shaft Radial Play 0.02Max. (450 g-load) | ||
+ | |||
+ | Shaft Axial Play 0.08Max. (450 g-load) | ||
+ | |||
+ | Max. radial force 28N (20mm from the flange) | ||
+ | |||
+ | Max. axial force 10N | ||
+ | ---- | ||
=== References === | === References === | ||
+ | http:// | ||
https:// | https:// |