Differences

This shows you the differences between two versions of the page.

--- reprap:wanhao:duplicator6:major_components:extruder [2018/10/17 22:36] – champatron
+++ reprap:wanhao:duplicator6:major_components:extruder [2018/12/02 02:27] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-The printer uses what Wanhao calls a "MK11 extruder". There's no real standard [[ (fun history here) |https://groups.google.com/forum/#!topic/wanhao-printer-3d/TEdslEknny4]], but it is an improvement over Wanhaos previous extruders back to MK8.
+The printer uses what Wanhao calls a "MK11 extruder". There's [[https://groups.google.com/forum/#!topic/wanhao-printer-3d/TEdslEknny4|no real standard]], but it is an improvement over Wanhaos previous extruders back to MK8.
-It uses an MK10 nozzle and thermal barrier, but new heater block. The new heater block has deeper cartridge slots for larger heater cartridges and thermocouple. It still uses the same plastic feed system as the MK9.
+The stock MK11 uses a 0.4mm MK10 nozzle and PTFE thermal barrier, but new aluminum heater block. The new heater block has deeper slots for the larger 24v heater cartridges and thermocouple. It still uses the same plastic feed system as the MK9.