reprap:wanhao:duplicator6:how-to_guides:properly_tighten_nozzle_heat_block_heat_tube_assembly

This is an old revision of the document!


How to Properly Tighten the Nozzle+Heat Block+Heat Tube Assembly

What you don't want to happen…

In the above photos, the assembly was not tightened while hot, so there were small gaps between the heat tube, heat block, and nozzle which the molten filament was able to escape through. To avoid this, follow the below procedure:

Proper Procedure

blah

  • reprap/wanhao/duplicator6/how-to_guides/properly_tighten_nozzle_heat_block_heat_tube_assembly.1527050992.txt.gz
  • Last modified: 2018/12/02 02:27
  • (external edit)