Firmware [3DPrint.Wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Firmware ===== 
It is important to remember that the Duplicator 6 is pretty much a clone of the Ultimaker 2. As such, all firmware for the D6, like the Ultimaker 2 is based on the Marlin firmware.
Marlin is an open source firmware for the RepRap and Ultimaker family of 3D printers.  It became a standalone open source project on August 12, 2011 with its Github release.
Marlin is licensed under the GPLv3 and is free for all applications. 
**__Since Marlin is GPLv3, whomever publicly posts a compiled *.hex file, SHOULD also post the uncompiled source code for their branch.__** 

==== Comparison Table + Downloads ====

[[https://docs.google.com/spreadsheets/d/1U5o63_HAYJXiftFzkWV35aY18LsaAa6YmsQinx-vvnY/edit?usp=sharing|Firmware Downloads and Links]]

[[https://airtable.com/shrEoTT7ZfawAM2eu|Airtable Comparison of Firmware Config Files]]

[[https://docs.google.com/spreadsheets/d/13zAH9-iO4okugIl0U8sZ3-m_cOZMATAS8r5qP747B8A/edit?usp=sharing|Google Sheets Comparison of Firmware Config Files]]