Show pageOld revisionsBacklinksCite current pageBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Fire Hazard! ====== In September/October of 2016, community contributor Steven Jones identified, reported, and fixed a major issue with the Duplicator 6. He noticed that the 4 screws holding the build plate's heating element to the alloy plate could have been over-tightened, causing them to cut into the lacquer, which would short the heating element. ==== THIS CAN LEAD TO A TEMPERATURE RUN-AWAY SITUATION WHICH CAN EASILY LEAD TO FIRE! ==== reprap/wanhao/duplicator6/fire_hazard.txt Last modified: 2018/12/02 02:27by 127.0.0.1