Show pageOld revisionsBacklinksCite current pageBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Introduction ====== SkyNet is a firmware (based on Marlin) that will run on the Anet V1.0 board. At the moment there is a bug in version 2.0 about the autolevel of z axis and the author suggest to continue to use the version 1.1alfa for such feature. Version 2.2 was released on 3-Jan-2017. It is available[[https://drive.google.com/file/d/0B0Jb9SruV4vGWjliRnRNRHVXOUE/view|HERE]] Source: https://www.facebook.com/skynet3ddevelopment/posts/1757218651186387 reprap/firmware/anet/skynet/intro.txt Last modified: 2018/12/02 02:27by 127.0.0.1