Differences

This shows you the differences between two versions of the page.

--- reprap:electronics:heatbed_mosfet [2019/08/11 17:08] – [What you need] sjouke
+++ reprap:electronics:heatbed_mosfet [2019/08/11 17:13] – [Apply a second Mosfet (for the extruder)] sjouke
@@ Line 71: / Line 71: @@
 ==== Apply a second Mosfet (for the extruder) ====
-If you decide you want to use a mosfet for your extruder as well, here is a schematic you might find usefull
+Eventhough in my opinion it is not really necessary, you might want to decide you want to use a 2nd mosfet for your extruder as well, here is a schematic you might find usefull
 {{ :reprap:electronics:2mosfet.jpg ?600 |}}