reprap:creatility:ender-3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

reprap:creatility:ender-3 [2020/06/11 11:31] (current)
rcw88 created
Line 1: Line 1:
 +====== Creality Ender-3 ======
  
 +Comes in a few varieties now, with single Z axis stepper ​
 +The standard Ender-3 has a 0.4 nozzle, a print surface 235x235 with a Z of 250, the nominal print area is 220x220, but I've got prints to 230x230.  ​
 +Later versions have a few improvements to the Extruder, including a brass insert in the Extruder lever, because putting a few dozen spools through the printer if its in standard build will wear a slot in the lever and it siezes up.  ​
  • reprap/creatility/ender-3.txt
  • Last modified: 2020/06/11 11:31
  • by rcw88