Show pageOld revisionsBacklinksCite current pageBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Creality Ender-3 ====== Comes in a few varieties now, with single Z axis stepper The standard Ender-3 has a 0.4 nozzle, a print surface 235x235 with a Z of 250, the nominal print area is 220x220, but I've got prints to 230x230. Later versions have a few improvements to the Extruder, including a brass insert in the Extruder lever, because putting a few dozen spools through the printer if its in standard build will wear a slot in the lever and it siezes up. reprap/creatility/ender-3.txt Last modified: 2020/06/11 13:31by rcw88