reprap:creality:ender-3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

reprap:creality:ender-3 [2021/01/16 17:07]
dolphran created
reprap:creality:ender-3 [2021/01/16 21:05] (current)
dolphran
Line 1: Line 1:
-====== ​Creality ​Ender-3 ======+====== Ender-3 ======
  
 Comes in a few varieties now, with single Z axis stepper ​ Comes in a few varieties now, with single Z axis stepper ​
 The standard Ender-3 has a 0.4 nozzle, a print surface 235x235 with a Z of 250, the nominal print area is 220x220, but one can get prints to 230x230.  ​ The standard Ender-3 has a 0.4 nozzle, a print surface 235x235 with a Z of 250, the nominal print area is 220x220, but one can get prints to 230x230.  ​
 Later versions have a few improvements to the Extruder, including a brass insert in the Extruder lever, because putting a few dozen spools through the printer if its in standard build will wear a slot in the lever and it seizes up.  ​ Later versions have a few improvements to the Extruder, including a brass insert in the Extruder lever, because putting a few dozen spools through the printer if its in standard build will wear a slot in the lever and it seizes up.  ​
  • reprap/creality/ender-3.txt
  • Last modified: 2021/01/16 21:05
  • by dolphran