Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Last revisionBoth sides next revision | ||
reprap:anet:a8:specification [2020/03/06 08:21] – [Specification] 0scar | reprap:anet:a8:specification [2020/03/06 08:21] – SI standard requires a space between value and unit 0scar | ||
---|---|---|---|
Line 14: | Line 14: | ||
==== Technical Parameters ==== | ==== Technical Parameters ==== | ||
^ | ^ | ||
- | |Print Size|220 * 220 * 240mm| | + | |Print Size|220 * 220 * 240 mm| |
- | |Printing Speed|100mm/s| | + | |Printing Speed|100 mm/s| |
- | |Nozzle Diameter|0.4mm| | + | |Nozzle Diameter|0.4 mm| |
- | |Layer thickness|0.1-0.3mm| | + | |Layer thickness|0.1-0.3 mm| |
- | |XY Position Accuracy|0.012mm| | + | |XY Position Accuracy|0.012 mm| |
- | |Z Position Accuracy|0.004mm| | + | |Z Position Accuracy|0.004 mm| |
- | |Working Condition|Temp|10-30°C| | + | |Working Condition|Temp|10-30 °C| |
- | |::: |Humidity|20-50%| | + | |::: |Humidity|20-50 %| |
==== Electronics Board ==== | ==== Electronics Board ==== |