Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revisionLast revisionBoth sides next revision | ||
reprap:anet:a8:specification [2017/11/28 19:35] – [Technical Parameters] darkburrow | reprap:anet:a8:specification [2020/03/06 08:21] – SI standard requires a space between value and unit 0scar | ||
---|---|---|---|
Line 3: | Line 3: | ||
^ | ^ | ||
|Model | A8 | | |Model | A8 | | ||
- | |Machine Weight | 7.4kg| | + | |Machine Weight | 7.4 kg| |
- | |Gross Weight | 9.2kg| | + | |Gross Weight | 9.2 kg| |
- | |Machine size|500 * 400 * 450mm| | + | |Machine size|500 * 400 * 450 mm| |
- | |Packing size|510 * 345 * 215mm| | + | |Packing size|510 * 345 * 215 mm| |
|LCD Display|2004| | |LCD Display|2004| | ||
|Consumable Material|ABS/ | |Consumable Material|ABS/ | ||
- | |Material Diameter|1.75mm| | + | |Material Diameter|1.75 mm| |
|Frame|Acrylic| | |Frame|Acrylic| | ||
==== Technical Parameters ==== | ==== Technical Parameters ==== | ||
^ | ^ | ||
- | |Print Size|220 * 220 * 240mm| | + | |Print Size|220 * 220 * 240 mm| |
- | |Printing Speed|100mm/s| | + | |Printing Speed|100 mm/s| |
- | |Nozzle Diameter|0.4mm| | + | |Nozzle Diameter|0.4 mm| |
- | |Layer Resolution|0.05mm| | + | |Layer thickness|0.1-0.3 mm| |
- | |Layer thickness|0.1-0.3mm| | + | |XY Position Accuracy|0.012 mm| |
- | |XY Position Accuracy|0.012mm| | + | |Z Position Accuracy|0.004 mm| |
- | |Z Position Accuracy|0.004mm| | + | |Working Condition|Temp|10-30 °C| |
- | |Working Condition|Temp|10-30°C| | + | |::: |Humidity|20-50 %| |
- | |::: |Humidity|20-50%| | + | |
+ | ==== Electronics Board ==== | ||
+ | |Overall Size|100 * 95 * 20mm| | ||
+ | |Hole spacing|91.3 * 86.3mm| | ||
+ | {{: | ||