Show pageOld revisionsBacklinksCite current pageBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Cura ====== ===== Cura 2.1 ===== ==== Configuraton files(.json) ==== The configuration of the printer is defined by json files. Copy these into the folder C:\Program Files\Cura 2.1\resources\machines (Windows) or ~/.cura/machines (Mac). * **Anet A8 with autolevel and nozzle initialization at the corner** {{ :reprap:anet:a8:slicer:aneta8withinit.zip |}} * Anet A8 with autolevel (NOT tested) {{ :reprap:anet:a8:slicer:aneta8.zip |}} * Anet A8 with autolevel and reduce bed size to avoid colision between official Anet sensor and heatbed connector. A nozzle initializartion in the corner is added. {{ :reprap:anet:a8:slicer:aneta8reducedwithinit.zip |}} reprap/anet/a8/slicer/cura.txt Last modified: 2018/12/02 02:27by 127.0.0.1