reprap:anet:a8:replace_hb_connector

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
reprap:anet:a8:replace_hb_connector [2018/08/04 15:41] – [Option 3 - spade connectors] sjoukereprap:anet:a8:replace_hb_connector [2018/08/04 15:42] – [Option 4 - european style screw connectors] sjouke
Line 70: Line 70:
 -feel free to write this chapter - always keep in mind : **if it works**, there is no wrong way of fixing your problem just easy and hard ways -feel free to write this chapter - always keep in mind : **if it works**, there is no wrong way of fixing your problem just easy and hard ways
 ==== Option 4 - european style screw connectors ==== ==== Option 4 - european style screw connectors ====
--feel free to write this chapter - +-feel free to write this chapter - always keep in mind : **if it works**, there is no wrong way of fixing your problem just easy and hard ways
 ===== Strain relief ===== ===== Strain relief =====
 A strain relief reduces the stress on the connector/solder. This is a good idea independently of which option was chosen or as a preventive measure before it fails. Here some options: A strain relief reduces the stress on the connector/solder. This is a good idea independently of which option was chosen or as a preventive measure before it fails. Here some options:
  • reprap/anet/a8/replace_hb_connector.txt
  • Last modified: 2021/09/02 21:59
  • by 127.0.0.1