reprap:anet:a8:replace_hb_connector

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
reprap:anet:a8:replace_hb_connector [2018/08/04 15:38] – [Replacing the hotbed connector] sjoukereprap:anet:a8:replace_hb_connector [2018/08/04 15:42] – [Option 4 - european style screw connectors] sjouke
Line 68: Line 68:
  
 ==== Option 3 - spade connectors ==== ==== Option 3 - spade connectors ====
--feel free to write this chapter - +-feel free to write this chapter - always keep in mind : **if it works**, there is no wrong way of fixing your problem just easy and hard ways
 ==== Option 4 - european style screw connectors ==== ==== Option 4 - european style screw connectors ====
--feel free to write this chapter - +-feel free to write this chapter - always keep in mind : **if it works**, there is no wrong way of fixing your problem just easy and hard ways
 ===== Strain relief ===== ===== Strain relief =====
 A strain relief reduces the stress on the connector/solder. This is a good idea independently of which option was chosen or as a preventive measure before it fails. Here some options: A strain relief reduces the stress on the connector/solder. This is a good idea independently of which option was chosen or as a preventive measure before it fails. Here some options:
  • reprap/anet/a8/replace_hb_connector.txt
  • Last modified: 2021/09/02 21:59
  • by 127.0.0.1