Differences

This shows you the differences between two versions of the page.

--- reprap:anet:a8:layer-heights [2017/01/11 23:26] – old revision restored (2016/12/28 12:15) nerolauda
+++ reprap:anet:a8:layer-heights [2018/12/02 02:27] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Valid Layer Heights ======
+====== Optimal Layer Heights ======
+Based on the lead of the Anet A8 Z-Axis leadscrews (8mm - each full rotation moves the Z-Axis 8mm), the Z-Motor steps per revolution (200), and [[http://prusaprinters.org/calculator/#optimallayer|this calculator]], we can calculate the list of optimal layer heights: **0.08, 0.12, 0.16, 0.20, 0.24, 0.28, 0.32** etc. - in increments of 0.04mm.
+The leadscrews are T8 - with lead 8mm, pitch 2mm and 4 screw threads.
+Note to editors: [[https://www.facebook.com/groups/OFFICIALAnet3DprinterSupportGroup/permalink/620740658114499/|discuss here]] before changing.
-Based on the pitch 1.25mm of the Anet A8 Z-Axis threaded rods M8, the Z-Motor 200 steps per revolution , and [[http://prusaprinters.org/calculator/#optimallayer|this calculator]], we can calculate the list of valid layer heights: ** 0.0125, ..., 0.025,..., 0.5, ...,0.1, ... ,0.2, ...** each sum or multiple of this values are exact steps counts.
-PLS DO NOT RESTORE WRONG VALUES