reprap:anet:a8:improvements:thumbwheelleveling

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
reprap:anet:a8:improvements:thunbwheelleveling [2016/11/20 18:52] – created vidschofelixreprap:anet:a8:improvements:thumbwheelleveling [2018/12/02 02:27] (current) – external edit 127.0.0.1
Line 4: Line 4:
 >Leveling the Bed is a Pain. >Leveling the Bed is a Pain.
  
-With the default leveling procedure, the springs and the screws with the head on top it's not very comfortable to level the bed. You can never level the corners, if the printhead is above it, because you cant access the screws. With a fullsize glasbed you are not even able to reach the screwheads at all. +With the default leveling procedure, the springs and the screws with the head on top it's not very comfortable to level the bed. You can never level the corners, if the print head is above it, because you can'access the screws. With a full size glass bed you are not even able to reach the screw heads at all. 
  
-The springs are nice to have in the beginning, because they sometimes prevent your printhead to damage itself or the bed if your offset is not perfect. But the springs thend to compress under the weight of the print wich brings additional problems.+The springs are nice to have in the beginning, because they sometimes prevent your print head to damage itself or the bed if your offset is not perfect. But the springs tend to compress under the weight of the print which brings additional problems.
  
 ===== The solution ===== ===== The solution =====
 Instead of leveling the bed from the top, you level the bed from the bottom.  Instead of leveling the bed from the top, you level the bed from the bottom. 
 ==== Needed Parts ==== ==== Needed Parts ====
-  * a 3, 3.5 or 4 mm drill (not sure about the atm)+  * a 4 mm drill
   * 8 x M3 nut    * 8 x M3 nut 
-  * printed thumbwheels like [[https://www.thingiverse.com/thing:874155|this]] or [[https://www.thingiverse.com/thing:16428|this]] or [[https://www.thingiverse.com/thing:243998|this]] or any you can find where you can place a M3-Nut inside.+  * thumbwheels  
 +    * printed Thumbwheels like [[https://www.thingiverse.com/thing:874155|this]] or [[https://www.thingiverse.com/thing:16428|this]] or [[https://www.thingiverse.com/thing:243998|this]] or any you can find where you can place a M3-Nut inside 
 +    * **OR** a manufactured thumbwheel like [[http://www.gearbest.com/3d-printer-parts/pp_270270.html|this]]
  
 ==== Howto ==== ==== Howto ====
   * remove the hotbed from the carrier (remove the wingnuts and take it off)   * remove the hotbed from the carrier (remove the wingnuts and take it off)
   * drill out the holes at the carrier   * drill out the holes at the carrier
-  * insert the m3 screws the were on the heated bed before again, but dont apply the springs+  * insert the m3 screws that were on the heated bed before again, but dont apply the springs
   * apply one m3 nut on each screw, tigthen it against the heated bed   * apply one m3 nut on each screw, tigthen it against the heated bed
   * now apply the thumbwheels   * now apply the thumbwheels
Line 29: Line 31:
 {{:reprap:anet:a8:improvements:thumbwheel.jpg?600|after applied thumbwheels}} {{:reprap:anet:a8:improvements:thumbwheel.jpg?600|after applied thumbwheels}}
  
 +{{htmlmetatags>metatag-robots=() 
 +metatag-description=(... because leveling the bed is a pain.)
 +metatag-og:description=(... because leveling the bed is a pain.)
 +metatag-media-og:image=(:reprap:anet:a8:improvements:thumbwheel.jpg)
 +}}
  
  • reprap/anet/a8/improvements/thumbwheelleveling.1479664332.txt.gz
  • Last modified: 2018/12/02 02:27
  • (external edit)