printers:parts:hotends:e3dv6

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
printers:parts:hotends:e3dv6 [2018/12/02 02:27] – external edit 127.0.0.1printers:parts:hotends:e3dv6 [2020/12/21 08:06] (current) – [E3D V6 Extruder] simon.pilepich_gmail.com
Line 1: Line 1:
-====== E3D V6 Extruder ======+====== E3D V6 ======
  
-Installing the E3D V6, Whether it's a clone or the original hotend from E3D, is a massive upgrade to the Anet A8. The main way it seems to affect the printer (apart from the benefits of the extruder itself) is it decreases the amount of impulse force being applied to the printer frame, by way of decreasing the mass of the X carriage. This has the overall effect of reducing load on the X and Z motors, in addition to reducing the wobbling and inaccuracies caused by the impulse forces applied to the frame when the print head rapidly changes direction.+{{:printers:parts:hotends:5d7077f3b330ae13091e0217-large.jpg?400|}}
  
 +The V6 hot-end is a is modular hot-end designed and marketed by E3D (https://e3d-online.com/) that has been cloned and modified extensively and is available from other manufacturers.
 +
 +The V6 uses a 22.3mm diameter aluminium heatsink. The complete hot-end include a removable heat break, heater block, heater element, temperature sensor and nozzle. The hot-end is versatile hot-end allowing a wide variety of filaments to be used by switching out individual components to suit. It is available in direct drive and Bowden configurations.
 + 
 +===Pros===
 +
 +Installing the E3D V6 can be a suitable upgrade to many printers as it's lightweight can reduce the load on X/Y carriage mechanisms.
 +
 +The ubiquity of the hot-end makes sourcing compatible parts cheap and well supported by the community. (https://www.thingiverse.com/search?q=e3d+v6)
 +
 +
 +===Cons===
 +
 +Poorly manufactured clones can sometimes include components with poorly machined tolerances or materials with less efficient thermal or mechanical properties. 
 +
 +When retrofitting to existing printers with different styles of printers the overall height may affect printable area if due consideration is not taken as the V6 is considerably longer than some other designs.
 ===== Quick note on the E3D Extruder types ===== ===== Quick note on the E3D Extruder types =====
  
  • printers/parts/hotends/e3dv6.txt
  • Last modified: 2020/12/21 08:06
  • by simon.pilepich_gmail.com