====== Specifications ======


==== Official Specifications ====
[[http://www.wanhao3dprinter.com/Unboxin/ShowArticle.asp?ArticleID=74|Wanhao's Product Page]]
(May contain errors and oversimplifications, should not be thought of as authoritative, here for reference only)

  * Printing Technology: Fused Filament Fabrication (FFF)/(FDM)
  * Build Volume: 200mm x 200mm x ~180mm (tall)
  * Layer Resolution: from Low of 200microns to Ultra 20 microns
  * Positional Precision: X 12.5 microns, Y 12.5 microns, Z 5 microns
  * Printing Material: PLA, ABS, PVA, PEVA, HIPS
  * Filament Diameter: 1.75mm
  * Nozzle Diameter: 0.4mm
  * Print Speed: 30mm - 150mm/s
  * Travel Speed: 30mm - 150mm/s
  * Extruder Temperature Range: 180degC - 260degC
  * Heated Build Plate Temp Range: 50degC - 100degC

Physical Dimensions:

  * Frame Dimensions: X 345mm x Y 364mm x Z 480mm
  * Shipping Box: X 420mm x Y 420mm x Z 550mm
  * Net Weight: 13.9kg
  * Gross Weight: 16.8kg

Operating Conditions:

  * Ambient Operating Temperature: 15degC - 32degC
  * Storage Temperature: 0degC - 32degC
  * Average Noise Level: 49dB

Electrical Specifications:

  * AC Outlet Input: 100-240V, 50-60Hz
  * Power Consumption: ~4 Amps, 221 Watt Max

[[http://www.wanhao3dprinter.com/xiazai/d6_user_manual_rev_a.pdf|Wanhao's Duplicator 6 User Manual rev A]]

[[https://cdn.shopify.com/s/files/1/0299/7809/files/Wanhao_D6_eBrochure.pdf|Wanhao's Duplicator 6 eBrochure]]

==== Real World Specifications ====

[Copied from Wanhao Specs page, changes/corrections in **BOLD**]
  * Printing Technology: Fused Filament Fabrication (FFF)/(FDM)
  * Build Volume: 200mm x 200mm x ~180mm (tall)
  * Layer Resolution: from Low of 200microns to Ultra 20 microns
  * Positional Precision: X 12.5 microns, Y 12.5 microns, Z 5 microns
  * Printing Material: PLA, ABS, PVA, PEVA, HIPS **(Additional materials possible after hot end upgrades)**
  * Filament Diameter: 1.75mm
  * Nozzle Diameter: 0.4mm **(possible to change to 0.2mm - 0.6mm with replacement parts)**
  * Print Speed: 30mm - 150mm/s
  * Travel Speed: 30mm - 150mm/s
  * Extruder Temperature Range: 180degC - **200degC (Above 200degC, the PTFE tube in the heat block will begin breaking down, causing clogs and releasing toxic? gases)**
  * Heated Build Plate Temp Range: 50degC - **120degC**

Physical Dimensions:

  * Frame Dimensions: X 345mm x Y 364mm x Z 480mm
  * Shipping Box: X 420mm x Y 420mm x Z 550mm
  * Net Weight: 13.9kg
  * Gross Weight: 16.8kg

Operating Conditions:

  * Ambient Operating Temperature: 15degC - 32degC
  * Storage Temperature: 0degC - 32degC
  * Average Noise Level: 49dB **(Much quieter after installing motor dampers)**

Electrical Specifications:

  * AC Outlet Input: 100-240V, 50-60Hz
  * Power Consumption: ~4 Amps, **~300 Watt Max (when both heaters are active)**