[mcu rpi]
serial: /tmp/klipper_host_mcu

[bltouch]
sensor_pin: ^rpi:gpio0
#   Pin connected to the BLTouch sensor pin. Most BLTouch devices
#   require a pullup on the sensor pin (prefix the pin name with "^").
#   This parameter must be provided.
control_pin: rpi:gpio27
#   Pin connected to the BLTouch control pin. This parameter must be
#   provided.
z_offset: 0.2
#pin_up_touch_mode_reports_triggered: False
#probe_with_touch_mode: True